It is currently Tue Jan 23, 2018 5:37 am

 Page 1 of 1 [ 1 post ] 
Author Message
 Post subject: Level-D 767 Double panel mod (pilot and co-pilot)
PostPosted: Wed Nov 23, 2016 12:26 am 
User avatar

Joined: Fri Feb 27, 2009 1:39 am
Posts: 1894
Location: Up here wishing I was down there.
This was the solution BEFORE the Steam version was released (taken from an old backup):

1. Open up the panel.cfg which is inside the following FSX folder: /SimObjects/Airplanes/LVLD_B763/Panel.cfg

2. Once you open this file, look for the [Window03] entry and COPY the ENTIRE BLOCK of data that begins with GAUGE.

3. Now look for the [Window02] entry and DELETE all the GAUGE entries and PASTE the data block which you copied from the previous step. I chose [Window02] because it's the FO Overhead panel, which I never use.

4. After copying the data block into the [Window02] entry, make the following changes to it:

size_mm=1280, 680

5. Save the file and run FSX.

6. Once inside the Level-D cockpit, click Shift-3 and now instead of seeing the FO Overhead panel, you will see the FO Panel.

NOTE: If this solution no longer works, try the Steam Edition solution below, that should work.

For FSX Steam Edition:

Go to this folder Steam\steamapps\common\FSX\SimObjects\Airplanes\LVLD_B763\Panel

Add this at the bottom of Window Titles:
window11=Boeing 767 Dockable Upper Panel First Officer

Add this after Window10:
size_mm=1280, 680

gauge00=LVLD\B767main!lightFO, 0, 0
gauge01=LVLD\B767Afds!MCP, -41, 0
gauge02=LVLD\B767Afds!Nav2, 546, 0
gauge03=LVLD\B767Afds!Autoland, 578, 194
gauge04=LVLD\B767Afds!MasterSwitch, 757, 37
gauge05=LVLD\B767Afds!AltAlert, 1144, 225
gauge06=LVLD\B767Afds!InstrSelectFO, 1200, 398
gauge07=LVLD\B767Afds!GASwitch, 165, 632
gauge08=LVLD\B767Afds!FOSwitch, 195, 632
gauge09=LVLD\B767Afds!GearFO, 282, 273
gauge10=LVLD\B767Afds!FOBrakePress, 504, 200
gauge11=LVLD\B767main!hdg, 267, 166
gauge12=LVLD\B767main!airspeedR, 555, 264, 168
gauge13=LVLD\B767main!altimeterR,1028, 221, 148
gauge14=LVLD\B767main!vsiR, 1032, 380, 136
gauge15=LVLD\B767main!rmiR, 547, 444, 176
gauge16=LVLD\B767main!clockR, 1022, 528, 146
gauge17=LVLD\B767eadi!EADI, 766, 172, 221,, FO
gauge18=LVLD\B767ehsi!EHSI, 764, 408, 227,, FO
gauge19=LVLD\B767eicas!EICAS, 22, 180, 225,, FO
gauge20=LVLD\B767leicas!LEICAS, 22, 409, 225,, FO
gauge21=LVLD\B767main!ecuR, 270, 622, 146
gauge22=LVLD\B767main!ESW, 15, 629, 150
gauge23=LVLD\B767main!TRP2, 275, 224


I don't have my monitors side-by-side so the alignment is off, and I haven't bothered to tweak the panel positions yet.

For those that don't have the LDS767, why bother doing this? There are controls near the landing gear that are only accessible from the first officer panel.

i7-6700K @ 4.2GHz, G SKILL DDR4 32GB @ 3200MHz
ASUS MAXIMUS VIII Formula, EK triple watercooling
ASUS dual GTX950 OC STRIX, HyperX Cloud II headset
SAMSUNG SSD 850 EVO 250GB and 500GB
EVGA Supernova G2 850W, CORSAIR Obsidian 750D
Display posts from previous:  Sort by  
 Page 1 of 1 [ 1 post ] 

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to: