|
Author |
Message |
cva1412
|
Post subject: Black ground texture Posted: Sat Mar 28, 2015 9:20 pm |
Joined: Tue Jul 22, 2014 1:28 am Posts: 125 Location: CYTA (Pembroke, ontario)
|
Hey guys, in preparation for the Multi flight for the 28 March, I looked at the 2 airports to see how they look and maybe find a better scenery. KJFK looks OK but KTPA is black. Buildings, jetways , signs and the outer lines for the taxi and runways are there but everything else is black. I've tried 10 different airports ( Can and US) and they're all good, only Tampa in black. It's the same with or without DX10. When I zoom out you can see that the airport zone is black, if I go out further the airport appears. I've been surfing the net to find a solution but not much for problem with just the one airport. Any ideas?
_________________ Fly, Navigate, Communicate....words to live by!
|
|
|
|
|
cva1412
|
Post subject: Re: Black ground texture Posted: Sat Mar 28, 2015 10:37 pm |
Joined: Tue Jul 22, 2014 1:28 am Posts: 125 Location: CYTA (Pembroke, ontario)
|
Thanks Cal, but it's already set.
_________________ Fly, Navigate, Communicate....words to live by!
|
|
|
|
|
CVA0319
|
Post subject: Re: Black ground texture Posted: Sun Mar 29, 2015 4:22 pm |
Joined: Tue Dec 01, 2009 1:26 am Posts: 583
|
It may be worth your time to check your addon scenery folder(s) to see if you have two different sceneries installed for that airport also check to ensure that airport is higher priority than any regional sceneries such as Orbx regions.
Gary
_________________ Global+Vector,FS_G 2010,REX4,NRM,CRM,PFJ,PNW,SAK,NCA,Tong_Fjords 0S9,3W5,7S3,KCMW,KORS,PAKT,WA56,WA79,W52,PAGS,PAJN,CZST +Portland City,2S1,CEN4,CEJ4,KHQM,7WA3,CBB7,KPDX G_NA packs 1-8,EDBH
|
|
|
|
|
mhooner
|
Post subject: Re: Black ground texture Posted: Mon Mar 30, 2015 1:26 am |
Joined: Sat May 19, 2001 10:14 pm Posts: 423 Location: Whitehorse YT
|
What Gary says. I had this problem with CYVR before, conflicting sceneries.
_________________ Harry CVA1951
|
|
|
|
|
cva1412
|
Post subject: Re: Black ground texture Posted: Mon Mar 30, 2015 3:16 am |
Joined: Tue Jul 22, 2014 1:28 am Posts: 125 Location: CYTA (Pembroke, ontario)
|
Thanks for your help guys. After digging for a bit, I remember installing "tampa 3d" for FSX about 6 mounts ago. It was working fine at the time. For some reason the file(s) got corrupted and after re-install of the scenery did the trick, everything is back to normal. Thanks again guys!
_________________ Fly, Navigate, Communicate....words to live by!
|
|
|
|
|
|
|